Hardware element down-checkpoint-gaia,secureplatform

Hardware element down-checkpoint-gaia,secureplatform
0

Hardware element down-checkpoint-gaia,secureplatform

Vendor: checkpoint

OS: gaia,secureplatform

Description:
Alert if any hardware elements are not operating correctly.

Remediation Steps:
Troubleshoot the hardware element as soon as possible.

How does this work?
Check the RAID status using the built in “raid_diagnostic” command.

Why is this important?
If a RAID device is degraded, a possible loss of redundancy and disk performance may result in a severe issue.

Without Indeni how would you find this?
An administrator could login and manually check the status.

chkp-os-raid_diagnostic

name: chkp-os-raid_diagnostic
description: Checks the health of a raid
type: monitoring
monitoring_interval: 5 minutes
requires:
    vendor: checkpoint
    or:
    -   os.name: gaia
    -   os.name: secureplatform
    asg:
        neq: true
comments:
    hardware-element-status:
        why: |
            If a RAID device is degraded, a possible loss of redundancy and disk performance may result in a severe issue.
        how: |
            Check the RAID status using the built in "raid_diagnostic" command.
        can-with-snmp: false
        can-with-syslog: false
steps:
-   run:
        type: SSH
        command: ${nice-path} -n 15 raid_diagnostic
    parse:
        type: AWK
        file: raid_diagnostic.parser.1.awk

cross_vendor_hardware_element_status

// Deprecation warning : Scala template-based rules are deprecated. Please use YAML format rules instead.

package com.indeni.server.rules.library.templatebased.crossvendor

import com.indeni.server.rules.RuleContext
import com.indeni.server.rules.library.templates.StateDownTemplateRule
import com.indeni.server.rules.RemediationStepCondition

/**
  *
  */
case class cross_vendor_hardware_element_status() extends StateDownTemplateRule(
  ruleName = "cross_vendor_hardware_element_status",
  ruleFriendlyName = "All Devices: Hardware element down",
  ruleDescription = "Alert if any hardware elements are not operating correctly.",
  metricName = "hardware-element-status",
  applicableMetricTag = "name",
  alertItemsHeader = "Hardware Elements Affected",
  alertDescription = "The hardware elements listed below are not operating correctly.",
  baseRemediationText = "Troubleshoot the hardware element as soon as possible.")(
  RemediationStepCondition.VENDOR_CISCO ->
    """
      |While the port may be in up status, the link quality might be degraded and is not between the threshold levels. Check the following to troubleshoot this issue.
      |1.	Run the “show interface transceiver detailed” NX-OS command to display information about the transceivers connected to a specific interface. Besides, this NX-OS command output provides information about the Cisco SFP Product ID (PID). NOTE: In case that have been used 3rd party SFPs it is possible to get an Indeni alert because the current light signal is different than the recommended min/max thresholds defined by Cisco.
      |2.	Use the “show interface transceiver calibrations” NX-OS command to display calibration information for the transceiver interfaces.
      |3.	Consider to enable DOM (if supported). Digital Optical Monitoring or DOM is an industry wide standard, intended to define a SFP to access real-time operating parameters such as Tx power, Rx power etc. More details can be found below: https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/DOM_matrix.html
      |4.	Cisco has published official specifications (Rx, Tx power level etc) per transceiver category and can be found at the following link: https://www.cisco.com/c/en/us/products/interfaces-modules/transceiver-modules/index.""".stripMargin,
  RemediationStepCondition.VENDOR_FORTINET ->
    """
      |1. Login via ssh to the Fortinet firewall and run the FortiOS command "exec sensor list" to review the status of the hardware components and temperature thresholds. When the flag to the command output is set to 0, the component is working correctly and when flag is set to 1, the component has a problem. The FortiOS command "execute sensor detail" will show extra information such as the low/high thresholds. More details can be found here: http://kb.fortinet.com/kb/viewContent.do?externalId=FD36793&sliceId=1
      |2. Consider running the fotrinet hardware diagnostics commands. While they do not detect all hardware malfunctions, tests for the most common hardware problems are performed. More details can be found here:
      |- http://kb.fortinet.com/kb/viewContent.do?externalId=FD39581&sliceId=1
      |- http://kb.fortinet.com/kb/documentLink.do?externalID=FD34745
      |3. It is recommended that any failed fan or power supply unit should be replaced immediately.
      |4. The cooling system for the devices should be installed to avoid overheat.
      |5. If the problem persists, contact Fortinet Technical support at https://support.fortinet.com/ for further assistance.""".stripMargin
)